How to Use
Your Device
A complete guide to getting the most out of your at-home microneedling treatment — for both skin and scalp.
Watch Full Tutorials Below
How to use our MTS-64 Beauty Device
How to apply the PDRN Moisture Advanced Ampoule
Before Your First Use
Unbox your device and place it in the charging cradle. Charge for approximately 1 hour before first use. Ensure the voltage on the charging adapter matches the input voltage marked on the device label.
Check Voltage
Before placing the device in the charging cradle, verify the charging adapter input voltage matches the label on your device.
Install the Ampoule
Install the ampoule bottle into the coupling part of the sterilized single-use needle. Never pour active liquid directly into the cartridge.
Attach to Device
After coupling the needle and ampoule bottle into the cartridge, insert and lock the cartridge into the main body coupling part.
Power On & Adjust
Hold the power button for 2 seconds to turn on. Use the speed adjustment button to select your preferred intensity level, then begin.
Power Off & Clean
When finished, press the power button to turn off. Separate the ampoule bottle and cartridge and dispose or clean appropriately.
Good to Know
Important notes for safe, effective use
Auto-Off Feature
The device automatically powers off after 10 minutes of continuous use to protect both you and the device.
Single-Use Needles
Always use fresh, sterilized single-use needles. Never reuse needles or share with others for hygiene and safety.
Gentle Pressure Only
Avoid pressing too hard. The micro-needles work best with light, consistent strokes — let the device do the work.
Skin Treatment Zones
Follow the motion guide for each area of the face
- 1Begin from the site 1cm away from the corner of your eyes.
- 2Glide across the cheekbone toward the bridge of the nose.
- 3Repeat the motion 2–3 times, going and returning gently.
- 1Start from the outer edge of the jaw and work inward.
- 2Follow the natural curve of the jaw line.
- 3Move inward toward the chin, repeating 2–3 times.
- 1Work along the natural forehead line from one side.
- 2Glide smoothly to the opposite side and return.
- 3Complete 2–3 gentle passes across the forehead.
- !Always use gentle pressure — never press hard into the skin.
- !Do not needling over active breakouts, wounds, or irritated areas.
- !Follow up with your after-care products immediately after treatment.
Scalp Treatment Guide
Tailored technique for hair and scalp health
- 1Use straight back-and-forth strokes to avoid tangling your hair.
- 2Work across your desired area in organized, parallel passes.
- 3Apply only gentle pressure — let the device do the work.
- MM-Shape: Focus on the front hairline and temples, working inward.
- OO-Shape: Target the crown area in a circular pattern moving outward.
- UU-Shape: Treat the sides and back of the scalp in a U-shaped sweep.
- 1Shampoo your hair and scalp thoroughly before treatment.
- 2Dry your hair completely — treatment is performed on a dry scalp.
- 3Apply your chosen ampoule and attach needle before beginning.
- ✓Part your hair into sections to ensure even coverage across the scalp.
- ✓Apply after-care serum or treatment immediately after needling for best absorption.
- ✓Consistency is key — regular sessions produce better long-term results.